Guest Bathroom Door Re-do

Remember this guy? We started blogging about it here, and today I'm going to cover the second half of our first True Value project.



We used an etched glass kit (the material comes on a roll) on the insides of both pieces of plexi. You can't see through it at all, so it gives 100% privacy while still allowing the light from the bathroom to shine through into the hallway. It's a really pretty effect at night! After that, I mitered some decorative wood moulding and attached it to the plexi using epoxy, I started filling in all the gaps with stainable/paintable wood filler.



Here's a close up of the wood filler after it had dried. It's amazing how it has the ability to make the moulding look like it was always a part of the door. (And hide all my imperfect cuts. Shhh!)



The door knob was preventing the door from laying flat while the epoxy dried, so I set it on top of four paint cans.



The next thing I did was tape off the door knob and plexi glass.





I was so proud of my tape job on the knob I actually made Layla come outside and have a looksie. I probably took 7 or 8 pictures of this bad boy, but Layla thought it would be a little excessive to post more than one. :-)

After the tape was in place it was prime time! I used some gray-tinted primer that we had left over from a previous project.



Finally, I painted the door Benjamin Moore's "Fieldstone". Once it was dry, Layla came out and did her thing with her little electric sander.



We picked up some poly the last time we were at True Value. I gave the door a coat to seal and protect it.



We could hardly wait to get it into the house and on the guest bathroom doorway. It's been really uncomfortable for our guests to go to the bathroom for the past few weeks, so we were eager to give them their privacy back.



(I kid, I kid!)

Here it is today, happily hanging in the hallway...



We changed out the mirror over the linen press with one that we were previously using in the kitchen. We like the way its curves contrast with the straight lines of the wood planks on the wall behind it. (Not to mention, we've got plans for the rectangular gray one inside the bathroom now- more on that to come!)



Move your mouse back and forth over the image below to see the before and after.



We did a different technique on the inside of the bathroom door, which we'll blog about as we start to renovate the guest bathroom. We're super pleased with how our first True Value project turned out and can't believe we almost threw this old beauty away at one point. Silly wabbits!

We're gearing up for our 2009 Halloweenie Roast this Friday. It's a costume party and we'll be counting on you guys to choose a winner next week. Even though Layla and I aren't eligible to win the prize because we're hosting the contest, that didn't stop us from really getting into picking out our costumes! We'll be shooting video and taking plenty of photos to capture all the craziness. It should be a blast and we're really looking forward to hanging out with our friends!

Have a great Halloween week,
Kevin

---------------------------------------------------------------------------------------------------

We are one of five bloggers selected by True Value to work on their DIY Blog Squad. We have been compensated for our time commitment to the program, as well as our posts about our experiences. We have also been compensated for the materials needed for our DIY projects. However, our opinions are entirely our own and we have not been paid to publish positive comments.

---------------------------------------------------------------------------------------------------

Check out the Lettered Cottage Home Zinc Placecards Giveaway at Made 2 Create!



---------------------------------------------------------------------------------------------------

This post brought to you by...

Kimm at Reinvented